Land Rover Accessories > Floor mats

Floor mats

Range Rover - Land Rover Discovery - Defender - LR3- Freelander - Series

Carpet Mat Sets: for rubber see below Is it long past time to replace those old, dirty, stained and worn out original carpet mats? Nothing improves the look of the interior faster than a fresh set! BP's custom floor mats are made to the same standard as genuine, but at a much lower price. The deep pile and color matches your carpet, and the heavy rubber backing prevents slippage. Additional clips also help hold the mats in place. When dirty they can simply be removed and hosed off. The patterns are cut to exactly match the floor contours, and the edges are stitched, not bound, for added toughness. These mats come with a 2 year guarantee, a full year longer than genuine. The mats are available as either a 2 piece set - front only, 3 piece set - front and back seat area or a 1 piece cargo mat.

These mats are made of DuPont ®100% continuous filament nylon face. If you look at other companys mats and the yarn is not identified as nylon, it's a sure indication that it's a lower quality item. You can barely dig your fingers down through the yarn to the bottom of the mat, it's that thick.

Please give us the model, year and the factory name of the interior color when ordering. Please allow a few days for delivery.

Mat colors:

Order:

DISCOVERY SERIES I & II  2 PIECE SET   LMFP
DISCOVERY SERIES I & II   3 PIECE SET    LMTP
DISCOVERY SERIES I & II   CARGO MAT   LMCP
DEFENDER 90 & 110   2 PIECE SET   LMFP
DEFENDER 90 & 110   3 PIECE SET   LMTP
DEFENDER 90 & 110   CARGO MAT   LMCP
FREELANDER   2 PIECE SET   LMFP
FREELANDER   3 PIECE SET   LMTP
FREELANDER   CARGO MAT   LMCP
RANGE ROVER 1 CLASSIC 100"   2 PEICE SET   LMFP
RANGE ROVER 1 CLASSIC 100"   3 PIECE SET  LMTP
RANGE ROVER 1 CLASSIC 100"   CARGO MAT  LMCP
RANGE ROVER 1 LWB   2 PIECE SET   LMFP
RANGE ROVER 1 LWB   3 PIECE SET   LMTP
RANGE ROVER 1 LWB   CARGO MAT   LMCP
RANGE ROVER 2    2 PIECE SET   LMFP
RANGE ROVER 2    3 PIECE SET   LMTP
RANGE ROVER 2   CARGO MAT    LMCP
LR3   2 PIECE SET EAH500070PMA (Ebony or Alpaca only)
LR3   HIGH SIDE CARGO MAT  EBF500010

Click here to see our line of heavy duty rubber cargo liners

Heavy Duty Rubber Floor Mats: Range Rover II, Discovery 1 & 2

BP stocks heavy duty OEM quality rubber mats for later Range Rover and Disco. They are form-fitted, not generic, and tough enough to last for years. If you live in rough country, or use your truck for camping, skiing, or hunting, these are a must. The rear mats are in two sections for easier cleaning and installation.

Disco 1 full set

Disco 2 front mat: detail close-up

Order:

Range Rover II '99-'02:	front, pair GMS059	rear passenger set GMS060
Discovery 1 '94-'99:	front pair GMS052	rear passenger set GMS053
Discovery II '99-'04:	front pair GMS054	rear passenger set GMS055
LR3	Mat set, front & middle  EAH50050PMA

Heavy Duty 3-Piece Molded Floor Set, Series II-IIA-III, 4 cylinder

Noise and heat are two things that can really wear you down when driving for hours in a Series truck. Anything that you can do to cut those down really helps the fatigue factor. The old rubber 'County' mats from years ago were pretty good but are no longer available. We found a set of great 'mats' (it's too wimpy a word for these big boys) that will do the job and then some, and they're far better than the old Land Rover sets.

The first piece is the floor mat above: made of one piece molded rubberized vinyl, this baby weighs 30 lbs. and is over 1/2 inch thick! You can see that it's molded to drop right in and it includes the toe boards. If equipped with overdrive you'll have to cut out a hole for the shifter, plus the high beam switch and throttle stop. The edges are bevelled, and it's molded to sit in position without any attachment hardware (it ain't goin' nowhere). The footpad areas are cushioned, and the3/8" tall horizontal strips will be perfect for mud and water: simply use a broom or a hose to wash it out.

Included in this 3 piece set is a seperate bulkhead cover. As any Series driver knows, that right foot can get pretty toasty, even with the heat shields in place. Your foot is still only inches from the exhaust manifold, and a thin sheet of aluminum just won't cut it. This molded piece slips right in to place, and you use a few self tapping screws with washers or cups to hold it in. It's high density and 1/4" thick, a good insulator and looks great to boot.

The third piece is this amazing seatbox cover, and what an item this is! 30 lbs of high density material, perfectly molded in one piece to seal up all of that gear whine and heat! It weighs more than the box itself. Remove the seats, drop it in place, cut out the mounting holes for the seats and the fuel selector if so fitted, and pop the seats back on. Man, do Series rigs need this! This 3 piece set has a nice pebbly finish similar to a tight weave carpet, and the color is a brownish taupe, perfect for hiding mud and dirt. Fit this set and heat and noise simply gets knocked down to an acceptable level, making your Series truck that much easier to live with on long runs.

Anyone who has a Series II-III and drives it will want this set: it's a major upgrade. 3 piece set.

MMS11

Floor mats for 4 cylinder Series II and III

These molded deluxe floor mats are even higher quality than the discontinued Genuine Land Rover items. The 'tread plate' pattern sits within a fairly deep lip, perfect for snow and mud. The oval logo in the corner proclaims 'Series', and they drop right in place, with no trimming.  Weight is a hefty 10 pounds for the pair, so these aren't the thin 'carpet runner' style: they will actually help keep noise and heat down. Hose 'em off when they get dirty and toss 'em back in. 2 piece set.

  For Series trucks with 4 cylinder engines (6's have a different floor area) GMS050

Return to vehicle accessories page

Return to the page top

If you experience any technical problems with the web site contact

British Pacific,  26007 Huntington Lane, Unit 2, Valencia, California 91355