|
Accessories
> Heavy duty molded floor, firewall and seat box mats
Heavy Duty
Molded Floor, Firewall, and Seatbox Mats
Floor and seat box mats being installed
into the British Pacifc race truck
Noise and heat can wear you down when driving for hours
in a Series rig. Anything that you can do to cut those down
really helps with the fatigue factor. The old rubber 'County'
mats from years ago were pretty good but are no longer available.
We found a set of great 'mats' (it's too wimpy a word for
these big boys) that will do the job and then some, and they're
far better than the old Land Rover sets.
.
one piece molded floor mat
The first piece is the floor mat above: made of one piece
molded rubberized vinyl, this baby weighs 30 lbs. and is over
1/2 inch thick! You can see that it's molded to drop right
in and it includes the toe boards. If equipped with overdrive
you'll have to cut out a hole for the shifter, plus the high
beam switch and throttle stop. The edges are beveled, and
it's molded to sit in position without any attachment hardware
(it ain't goin' nowhere). The footpad areas are cushioned,
and the 3/8" tall horizontal strips will be perfect for
mud and water: simply use a broom or a hose to wash it out.
One piece molded firewall mat
Included in this 3 piece set is a separate firewall cover.
As any Series driver knows, that right foot can get pretty
toasty, even with the heat shield in place. Your foot is still
only inches from the exhaust manifold, and a thin sheet of
aluminum just won't protect it. This molded piece slips right
in to place, and you use a few self tapping screws with washers
or cups to hold it in. It's high density and 1/4" thick,
a good insulator and looks great to boot.
One piece molded seat box cover
The third piece is this amazing seatbox cover, and what an
item this is! 30 lbs of high density material,
perfectly molded in one piece to seal up all of that
gear whine and heat! It weighs more than the box itself. Remove
the seats, drop it in place, cut out the mounting holes for
the seats and the fuel selector if so fitted, and pop the
seats back on. Man, do Series rigs need this!
This 3 piece set has a nice pebbly finish similar to a tight
weave carpet, and the color is a brownish taupe, perfect for
hiding mud and dirt. If it does get dirty soap and water will
do the job.
Fit this set and heat and noise gets knocked down to an
acceptable level, making your Series truck that much more
fun on long runs. Anyone who has a Series II-III and drives
it will want this set: it's a major upgrade.
We do try to keep them in stock, and they can be shipped
via UPS which keeps costs down.
MMS11
Sorry, pieces not sold individually. We've asked the manufacturer,
no dice.
Return to the page top
|
